{"title":"ESU","description":"","products":[{"product_id":"esu-58410-loksound-5-dcc-mm-sx-s4-blank-decoder-8-pin-nem652-with-11mm-x-15mm-speaker-power-pack-leads","title":"ESU-58410 - Loksound 5, DCC\/MM\/SX\/S4 Blank Decoder, 8 Pin, NEM652 with 11mm x 15mm Speaker \u0026 Power pack leads","description":"\u003cp\u003e\u003cimg\u003e\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eLokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. \u003cspan style=\"font-style: italic;\"\u003ePlease note the LokSound 5 DCC decoder does not come with a speaker.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eOperating modes\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eLike all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThis decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eMotorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe M4 protocol supports the automatic registration on mfx® compatible central units.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.\u003c\/p\u003e\n\u003ch2\u003eSound\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit \/ 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/p\u003e\n\u003ch2\u003eFunctions\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eWe are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.\u003c\/p\u003e\n\u003ch2\u003eMotor control\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eMotor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types.\u003c\/p\u003e\n\u003ch2\u003eLokSound 5 DCC\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":53760977338707,"sku":"ESU-58410","price":92.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1028\/2985\/0963\/files\/Harburn_ESU-58410.jpg?v=1781015213"},{"product_id":"esu-58419-loksound-5-dcc-mm-sx-s4-blank-decoder-21mtc-nem660-with-11mm-x-15mm-speaker","title":"ESU-58419 - Loksound 5, DCC\/MM\/SX\/S4, Blank Decoder, 21MTC, NEM660 with 11mm x 15mm speaker","description":"\u003cp class=\"bodytext\"\u003eThe LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eLokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. \u003cspan style=\"font-style: italic;\"\u003ePlease note the LokSound 5 DCC decoder does not come with a speaker.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eOperating modes\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eLike all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThis decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eMotorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe M4 protocol supports the automatic registration on mfx® compatible central units.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.\u003c\/p\u003e\n\u003ch2\u003eSound\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit \/ 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/p\u003e\n\u003ch2\u003eFunctions\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eWe are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.\u003c\/p\u003e\n\u003ch2\u003eMotor control\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eMotor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types.\u003c\/p\u003e\n\u003ch2\u003eLokSound 5 DCC\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":53760996540755,"sku":"ESU-58419","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1028\/2985\/0963\/files\/Harburn_ESU-58419.jpg?v=1781015133"},{"product_id":"esu-59020-lokpilot-5-basic-dcc-8-pin-with-wire-harness","title":"ESU-59020 - LokPilot 5 Basic, DCC, 8 Pin, with wire harness","description":"\u003cp class=\"bodytext\"\u003eWhile LokPilot 5 decoders can undoubtedly meet all imaginable requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles.\u003c\/p\u003e\n\u003ch2\u003eModes\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic is a \"pure-bred\" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 20 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eIt masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic Decoder detects the Märklin® brake distances as well as the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible.The LokPilot 5 Basic Decoder can be used on analog DC webs. The maximum speed can be set separately.The decoder switches \"on-the-fly\" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.\u003c\/p\u003e\n\u003ch2\u003eFunctions\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic has 4 reinforced function outputs in each version. In the 21MTC interface, there are 8 logic-level outputs at the interface, two of which are also suitable for controlling servos. All important lighting functions are available. The brightness of each output can be set separately.\u003c\/p\u003e\n\u003ch2\u003eMotor\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eThe motor control of the LokPilot 5 Basic delivers up to 0.9A continuous current. A variable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially for bell anchor motors – The typical \"hum\" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function allows the decoder to be automatically measured against the motor.\u003c\/p\u003e\n\u003ch2\u003eOperational reliability\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eOn request, a PowerPack can be connected to the LokPilot 5 Basic to bridge dirty rail cuts.\u003c\/p\u003e\n\u003ch2\u003eProtection\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eOf course, all function outputs as well as the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":53761000309075,"sku":"ESU-59020","price":28.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1028\/2985\/0963\/files\/Harburn_ESU-59020.jpg?v=1781014888"},{"product_id":"esu-59029-lokpilot-5-basic-dcc-21-pin-wire-harness","title":"ESU-59029 - LokPilot 5 Basic, DCC, 21 Pin, wire harness","description":"\u003cp class=\"bodytext\"\u003eWhile LokPilot 5 decoders can undoubtedly meet all imaginable requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles.\u003c\/p\u003e\n\u003ch2\u003eModes\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic is a \"pure-bred\" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 20 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eIt masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.\u003c\/p\u003e\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic Decoder detects the Märklin® brake distances as well as the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible.The LokPilot 5 Basic Decoder can be used on analog DC webs. The maximum speed can be set separately.The decoder switches \"on-the-fly\" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.\u003c\/p\u003e\n\u003ch2\u003eFunctions\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic has 4 reinforced function outputs in each version. In the 21MTC interface, there are 8 logic-level outputs at the interface, two of which are also suitable for controlling servos. All important lighting functions are available. The brightness of each output can be set separately.\u003c\/p\u003e\n\u003ch2\u003eMotor\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eThe motor control of the LokPilot 5 Basic delivers up to 0.9A continuous current. A variable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially for bell anchor motors – The typical \"hum\" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function allows the decoder to be automatically measured against the motor.\u003c\/p\u003e\n\u003ch2\u003eOperational reliability\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eOn request, a PowerPack can be connected to the LokPilot 5 Basic to bridge dirty rail cuts.\u003c\/p\u003e\n\u003ch2\u003eProtection\u003c\/h2\u003e\n\u003cp class=\"bodytext\"\u003eOf course, all function outputs as well as the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":53761023246675,"sku":"ESU-59029","price":28.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1028\/2985\/0963\/files\/Harburn_ESU-59029.jpg?v=1781014636"},{"product_id":"esu-59818-lokpilot-5-micro-dcc-mm-sx-m4-next18","title":"ESU-59818 - LokPilot 5 Micro, DCC\/MM\/SX\/M4, Next18","description":"\u003cp\u003eThe LokPilot 5 micro is a real multi-protocol decoder. It masters the data format DCC as well as Motorola, Selectrix and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus, the decoders log on to a suitable digital center fully automatically.\u003cbr\u003e\u003cbr\u003eIt masters all DCC programming modes and, thanks to RailCom, the CV values on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255.\u003cspan style=\"padding-right: 5px;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":53761025933651,"sku":"ESU-59818","price":39.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1028\/2985\/0963\/files\/Harburn_ESU-59818.jpg?v=1781014480"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1028\/2985\/0963\/collections\/esu.jpg?v=1781160112","url":"https:\/\/www.harburnhobbies.co.uk\/collections\/esu.oembed","provider":"Harburn Hobbies","version":"1.0","type":"link"}